Vintage Bicycle PartsAll around Vintage Bikes

Bicycle Motor Kit

Welcome to flmotorbikes If you are considering to purchase a Reliable motorized bicycle kit, for your current bicycle, then we will have what you need. We have been building and selling high quality Friction drive motorized bicycle kits since 2008 .Our motorized kits combine the best of the best. In addition to our own line of the highest quality components we select only the very best components from other industry leading manufacturers such as Honda engines,  All of our products are made in the U.S.A 

 

Why we use Friction drive

Simplicity of construction is the greatest advantage of a friction-drive system. Installing a friction-drive motor is simple: You merely attach it to the bicycle’s frame, above the rear tire, in such a way that the motor’s drive shaft makes contact with the tire. This layout also makes it simple to remove the motor or the bike tires whenever you need to do maintenance or change a flat. Also SAFTEY frist because on our friction kit there is no belt or chain to get stuck and when that happens on chain drive bike you will go from 30-0 in a couple of seconds.

The addition of extra moving parts means that a chain drive bike is more likely to break down than a friction drive. The chain connection is also considerably more complicated to install and maintain. In addition to adding a sprocket to one of the tires for the motor to utilize, you may have to adjust the chain length to fit your bicycle and add a chain tensioner to keep the drive chain from slipping off its sprockets. Also most importantly most of the chain drive kits come from china and are very unreliable.

 With our friction drive kit you can

Can go faster than electric bicycles.
-Has a farther range than electric bicycles.
-Weighs less than electric bicycles.
-Can be refueled quickly.
-As fuel is used, the weight of the bicycle decreases.
-A gas motor kit can be removed from one bike and installed on another.

                                  How it works                                    

 

 

 On The friction drive system the engineis on the left side and is propelled by a diamond knurled drive roller that locks on the top of your tire. The drive roller firmly grips your tire when locked in the “drive position”. When locked in the “off position”, the drive roller rests slightly off the tire. The drive roller is locked on and off the tire in seconds by simply sliding the unit up or down the slotted rear support bars and then locking the quick release lever. The kit is mounted over the rear tire of your bicycle as it performs better and is more stable). Than the front tire

Visit http://www.flmotorbikes.com/ for more info

About the Author